Blackdog Speed Shop Races its Way Into Top-10 in Lime Rock Race 2

  • May 28, 2018
  • Pratt Miller

Reading Time: 2 minutes

Strong runs from deep in the field for Camaro GT4.R quartet

LAKEVILLE, Conn. (May 28, 2018) – A pair of top-10 finishes Park left Blackdog Speed Shop in good spirits Monday following the second of two GTS SprintX races at Lime Rock for the Pirelli World Challenge. Both of the team’s Chevrolet Camaro GT4.Rs made tremendous progress from deep in the field to end Memorial Day on a high note.

Lawson Aschenbach and Andy Pilgrim placed third in their class and fifth overall in the No. 1 Blackdog Speed Shop Camaro GT4.R, while Michael Cooper and Tony Gaples made up more ground than any entry in the race with a 10th-place overall finish – after starting 25th – in the No. 11 Blackdog Speed Shop Camaro. They earned the race’s Hard Charger award for their efforts.

The results were enough to move Aschenbach and Pilgrim to third in SprintX points with Gaples and Cooper tied for fifth after six GTSX races.

Aschenbach and Cooper started, and unlike the morning race both Camaros made it through the start unscathed. The duo took advantage as Aschenbach moved up five spots and Cooper gained nine positions to 16th as the race went yellow on the opening lap.

It took 27 minutes for the race to resume, but when it did the Camaros kept up their charge. By the halfway mark, Cooper ran 11th and Aschenbach 12th as the pit window opened for the race’s mandatory driver change. Aschenbach ducked in from seventh with 23 minutes left and handed off to Pilgrim. Cooper came in two laps later from fourth for the change to Gaples.

Once the pit window closed with 20 minutes remaining, Pilgrim cycled through to ninth and Gaples to 11th. The team’s progression wasn’t done. Pilgrim gained three spots to sixth when a trio of cars ahead of him went off-track. Gaples also gained a spot late with a nifty move out of the famed Uphill corner.

Blackdog Speed Shop’s next race is set for June 22-24 at Road America in Elkhart Lake, Wisconsin.

READY TO PUSH BEYOND THE LIMITS?

Reach out to us to see how we can help solve your toughest design, engineering and production problems and bring your innovative vision to reality.